Description

HTM555's behavior is designed to behave like a human.
All the actions during the test were realized, including forward / backward, left / right, up / down, and horizontal / vertical of the antenna transmiƫng surface, and rotation based on 0/90 degrees of the antenna transmiƫng surface. CHANGEN calls this a five-dimensional action. The movement in dimensions can cover all test Status. This device is in compliance with GMW 3097: 2019 section 3.4.4 related requirements, and support Wanding Mode.

Function

According to international standards and the requirements of automobile manufacturers, the distance from the antenna to conductive materials, absorbing materials and operators is strictly limited.
In order to meet these stringent requirements,CHANGEN uses at least three latest patented technologies.
Based on the level of awareness of non-metallic materials, HTM555 uses compressed air and plastic components to achieve vertitcal / horizontal and 0/90 degrees motion changes.
All movements are monitored and controlled by the antenna control software.

Specification

Three-dimensional motion (X/Y/Z)	500mm × 500mm × 500mm (customizable)
Motor	Each axle with one stepper motor
Test standard	ISO11452-9 / GMW3097
Test mode	Wanding Mode
Position accuracy sensor	10 bits
Position accuracy	±2mm
Max load antenna	2kg
Antenna in-position sensor (patented technology)	Built-in
Antenna rotation sensor (patented technology)	Built-in
Antenna 0/90 degrees non-metallic cylinder (patented technology)	Built-in
Test cable mast	Built-in
Minimum required compressed air pressure / inlet diameter	0.5Mpa/8mm
Built-in controller power supply	AC 100V-240V,50Hz/60Hz
Fiber	Single core ST single mode 9/125μm
Fiber length	20 meters
Controller power	AC 100-240V,50Hz/60Hz
Controller port	USB 2.0
Antenna mast metal shield	Al-alloy
Antenna mast diamensions(package size)	195cm(L)*110cm(W)*110cm(H)
Remote control software	CHANGEN, Control Panel for HTM555
EMS performance	in compliance with ISO 11452-9
EMI performance	in compliance with IEC 61326 series
Warranty	12个⽉
*This product has passed the German TÜV Rheinland certification and meets CE relevant requirements.

Basic Config

HTM555 standard version

Motorized antenna movement in 3D space Pneumatic Control Position indicator Antenna status indicator Automatically calculates the number of moving steps based on the 3D size of the DUT Long-term software update service

Option Config

Link