Description

Newly designed supporting material special for CISPR 15:2008 CDNE test.
The shape of a square top hat is very convenient for tester's operation.
The design of 200mm length for each edge can be defined freely and fully meet the test standard requirements, no extra measurement is needed.
Perfectly support the EUT with one cable or two cables, or control / communication lines.
Specially designed cable-pressing block can ensure the cable be positioned according to the standard requirements.
Two cable-pressing blocks* provided as standard accessary with one set CDNE100.

*：More cable-pressing blocks can be ordered separately.

Function

Each dimension of the CDNE supporting material is comply with the test requirements, all four sides are with cable ties, so the EUT can be placed by one side or two sides in the EUT area.
CDNE100 is equipped with two cable-pressing blocks, and two EUTs can be tested concurrently. There are nine cable grooves with three different dimensions on each plate, three of them with up to 8mm depth and width,three up to 10mm and three up to 12mm, which are suitable for different diameters of the cables.
Customized product is available by your requests.

Specification

According to the updated requirement of Lights EUT test ：
A distance of 200mm±20mm shall be maintained between the CDNE and EUT;
The edge of the RGP shall be at least 200mm beyond the perimeter of the EUT;
The size of the EUT area is 600mm × 600mm;
The whole size of the supporting material CDNE100 is 1000mm × 1000mm;
When using this supporting material CDNE100, the test engineer only needs to place the EUT on the edge of the EUT area, put CDNE close to CDNE100, and CDNE100 not close to the wall. This will avoid the repeated meaturements during the test engineer's operation.

Basic Config

Model	CDNE100
Standards	CISPR 15:2018 ；CISPR 16-2-1:2014+A1, Clause 9
Colour	White
Relative permittvity	εr<1.4 (see the third-party test report provided by CHANGEN for details)
*Whole size	1000mm x 1000mm （±5mm）
*Size of EUT area	600mm x 600mm（±5mm）
Hight of cable supporting area	30mm(+10mm/0mm)
Length of cable supporting area	200mm(±20mm)
Hight of EUT area	100mm(±2mm)
Temperature resistance	-60°C to +250 °C
*Note: Size of whole product and EUT area could be customized.

Option Config

Model	CDNE100P
Dimension	600mm(L) × 200mm(W) × 50mm(H)
Function	hold cables

Link