Description

Typical application: The output port of RFS-RE126 is connected to the test input interface of the receiver or spectrum analyzer, signal analyzer. The other 6 input ports can be connected to test signals transmitted by different measurement antennas (such as log-periodic antennas) or measurement devices (such as LISN).

Advantages: It can avoid irreversible damage to equipment and cables caused by frequent disassembly and assembly of cables, reduce the measurement uncertainty of measured quantity values caused by cable switching, and improve the reliability of testing.

Function

Contains a set of SP6T RF switch modules;
Low-loss precision RF connectors are used inside the switch box (VSWR <1.15@18GHz, VSWR <1.3@26.5GHz) and low-loss RF cables;
Used in conjunction with RFS-MC16 to achieve remote control, and also supports manual control;
The unconnected connectors are automatically terminated with 50 ohms;
Support user customization (customizable maximum frequency, transmission power, connector type, etc.)

Specification

The following port configurations are available:
Output: SMA Female (frequency up to 26.5GHz)
Input 1: BNC Female (frequency up to 4GHz)
Input 2: N Female (frequency up to 18GHz)
Input 3: N Female (frequency up to 18GHz)
Input 4: N Female (frequency up to 18GHz)
Input 5: SMA Female (frequency up to 26.5GHz)
Input 6: SMA Female (frequency up to 26.5GHz)

Basic Config

RFS-CCxxx, xxx represents the RF switching situation. The customized information of RF switch box is as follows:
(Alternatively, users can put forward the system operation requirements, and CHANGEN assists the users determine the specifications of the RF switch box.)

(1) One way to multiple ways
(2) Can be customized according to frequency
(3) Interface type can be selected: BNC <4GHz, N <18GHz, SMA <26.5GHz, etc.
(4) RF average power for each interface can be required

Option Config

Link